Qsc-audio CX168 User Manual download pdf (Page 19)

OPERATION: GAIN CONTROL SECURITY PLATE

Gain Control Security Plate

After final gain adjustments have been made, the gain controls can be covered with a security plate. This easy-to-use security plate

makes it difficult for others to adjust the gain. This may be desirable in instances where the gain controls should not be tampered with. To

install the security plate:

When properly installed, the security panel will still allow you

to monitor all the channel status LED’s and power LED. The

amplifier front panel will look like the illustration, right, after

installing the security plate.

4. Make sure the LED’s are visible, then tighten the

screw with the hex key. Do not over tighten!

3. Line up the tabs with the keyed portion of the

ventilation slots, insert into the slot and then slide

the panel fully right, locking it in the slot.

2. Orient the panel as shown and slide the right end

of the plate under the screw.

1. Use a 9/64” or 3.5mm hex key to loosen

the screw. Do not remove; just loosen sev-

eral turns.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 35 36

No comments

Qsc-audio CX168 User Manual Page 19